tireheight.com

295/35R24 in inches

A 295/35R24 tire is 32.1″ tall and 11.6″ wide, and fits a 24″ wheel. In inches it is written 32.1×11.6R24.

Diameter32.13″
Width11.61″
Sidewall4.06″
295/35R24 drawn to scale: 32.13 inch diameter, 4.06 inch sidewall, 24 inch wheel, 11.61 inch tread width24″ wheel4.06″32.13″ overall11.61″ wideSide view
Drawn to scale. Nominal dimensions calculated from the size code.
Manufacturer data

How tall 295/35R24 tires really are

Heights published by Toyo for the one tire in this size. Their published revolutions per mile work out to 31.2″ under load (below).

The one tire listed, the Toyo Proxes ST III, measures 32.10″: 0.03″ shorter than the size code's 32.13″.

Height under load31.2″

Published revs per mile (647) mean the tire rolls like a 31.2″ tire on the vehicle. Use this for speedometer calibration.

1 tire in 295/35R24

Sort by the spec you care about.

LoadRevs/miSource
Toyo Proxes ST IIIPerformanceXL · 110V32.1049.610.12,337647Spec page

Is 295/35R24 a 32-inch tire?

≈32″

Yes. The size code works out to 32.13″, and the 1 tire here publishes 32.10″, so people call it a 32.

All 32-inch tire sizes, on every wheel size.

Compare with nearby sizes

Differences in overall diameter, calculated from each size code.

SizeDiameter ″vs 295/35R24Difference
285/35R2330.85-1.28″-4.0%
335/30R2330.91-1.22″-3.8%
295/30R2430.97-1.16″-3.6%
295/35R2331.13-1.00″-3.1%
285/35R2431.85-0.28″-0.9%
325/35R2331.96-0.17″-0.5%
285/40R2331.98-0.15″-0.5%
305/35R2432.41+0.28″+0.9%
305/40R2332.61+0.48″+1.5%
285/40R2432.98+0.85″+2.6%

How to read 295/35R24

How to read any tire size

295/35R24 110V as printed on the tire sidewall, with each part numbered295/35R24 110V123456
How 295/35R24 110V is printed on the sidewall. It's the most common code among the 1 tire here; tires in this size come in other load and speed ratings too.
1295Section width

295 mm across the widest point, or 11.61 inches. Every 295 size

235Aspect ratio

A percentage, not a measurement: the sidewall is 35% as tall as the tire is wide, which is 103.3 mm or 4.06 inches.

3RConstruction

Radial construction.

424Wheel diameter

Mounts on a 24-inch wheel. Approved wheel widths run 10.0″ to 11.5″.

5110Load index

Each tire carries up to 2,337 lb (1,060 kg) at its maximum pressure.

6VSpeed rating

Rated for up to 149 mph sustained.

XLExtra load

Printed after the size.

SpecificationInchesMetric
Overall diameter32.13816 mm
Section width11.61295 mm
Sidewall height4.06103.3 mm
Circumference100.92,564 mm
Revolutions per mile (calculated, unloaded)627.7390 per km
Revolutions per mile (published by manufacturers)647402 per km
Approved wheel width10.0–11.5254–292 mm

Speedometer error after switching to 295/35R24

Your actual speed– mph

Questions about 295/35R24

What is 295/35R24 in inches?

32.13 inches tall, 11.61 inches wide, on a 24-inch wheel. Written in inches, that is roughly 32.1×11.6R24.

What wheel width do I need for 295/35R24?

Manufacturers approve 10.0–11.5″ wide wheels for this size.

How many revolutions per mile does a 295/35R24 make?

Published figures run 647 revolutions per mile. The calculated figure is 627.7, but manufacturers measure the tire under load, where it rolls on a smaller radius.

How much taller is 295/35R24 than 285/35R24?

0.28 inches taller on paper (32.13″ vs 31.85″), which raises the axle about 0.14″. Your speedometer will read about 0.9% slow.